圆锥滚子轴承类型三 Tapered roller bearing type three:
双列圆锥滚子轴承Double row tapered roller bearings
双列圆锥滚子轴承，包括许多变型并具有不同的功能。根据其设计，这些轴承可承受径向重载、两个方向的轴向载荷且具有高度的刚性。双列圆锥滚子轴承通常用于齿轮箱、起重设备、轧钢机和采矿机械，例如隧道掘进机。
Double row tapered roller bearings include many variants and have different functions. Depending on their design, these bearings can accommodate heavy radial loads, axial loads in both directions and have a high degree of rigidity. Double row tapered roller bearings are typically used in gearboxes, lifting equipment, rolling mills and mining machinery, such as tunnel boring machines.
特点和优点
*高承载能力
双列圆锥滚子轴承适用于重径向和轴向载荷。圆锥滚子轴承的轴向承载能力随接触角α的增加而增加。接触角的大小通常在10°和30°之间，与计算系数e（来自产品表）有关：e值越大，接触角越大。
*双向轴向载荷
双列圆锥滚子轴承以特定的轴向间隙或预紧力将轴定位在两个方向上。
*高刚度
双列圆锥滚子轴承提供刚性轴承布置。
*低摩擦
优化的滚子端设计和法兰上的表面光洁度促进了润滑剂膜的形成，从而降低了摩擦。这还可以减少摩擦热和法兰磨损。此外，轴承可以更好地保持预紧力并在较低的噪音水平下运行。
*使用寿命长
与传统的直线滚道轮廓相比，基本设计轴承的冠状滚道轮廓和对数滚道轮廓轴承可优化沿接触表面的载荷分布，降低滚子端部的应力峰值，并降低对错位和轴偏转的敏感度。
*增强操作可靠性
滚子和滚道接触表面上的优化表面光洁度支持形成流体动力润滑膜。
*滚子轮廓和尺寸的一致性
双列圆锥滚子轴承的制造尺寸和几何公差非常紧密，几乎完全相同。这提供了最佳的载荷分布，降低了噪音和振动，并使预紧力设置得更准确。
Features and benefits
*High load carrying capacity
Double row tapered roller bearings are suitable for heavy radial and axial loads. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e (from the product tables): the larger the value of e, the larger the contact angle.
*Axial loads in both directions
Double row tapered roller bearings locate the shaft in both directions with a specific axial clearance or preload.
*High stiffness
Double row tapered roller bearings provide a stiff bearing arrangement.
*Low friction
The optimized roller end design and surface finish on the flange promote lubricant film formation, resulting in lower friction. This also reduces frictional heat and flange wear. In addition, the bearings can better maintain preload and run at reduced noise levels.
*Long service life
The crowned raceway profiles of basic design bearings and the logarithmic raceway profiles bearings optimize the load distribution along the contact surfaces, reduce stress peaks at the roller ends, and reduce the sensitivity to misalignment and shaft deflection compared with conventional straight raceway profiles.
*Enhanced operational reliability
Optimized surface finish on the contact surfaces of the rollers and raceways supports the formation of a hydrodynamic lubricant film.
*Consistency of roller profiles and sizes
Double row tapered roller bearings are manufactured to such close dimensional and geometrical tolerances that they are practically identical. This provides optimal load distribution, reduces noise and vibration, and enables preload to be set more accurately.
Inch double row tapered roller bearings
英制双列圆锥滚子轴承
轴承类型 | 国内新型号 | 国内旧型号 | 规格(dxDxB1(T)) | 重量(kg) | |
圆锥滚子轴承 | Tapered roller bearings | NA484/472D | - | 70×120×65.09 | 2.76 |
圆锥滚子轴承 | Tapered roller bearings | 598/592D | - | 92.075×152.4×82.55 | 5.74 |
圆锥滚子轴承 | Tapered roller bearings | 687/672D | - | 101.6×168.275×92.075 | 8.18 |
圆锥滚子轴承 | Tapered roller bearings | 861/854D | - | 101.6×190.5×127 | 15.59 |
圆锥滚子轴承 | Tapered roller bearings | 896/892D | 97528K | 136.525×228.6×123.825 | 20.6 |
圆锥滚子轴承 | Tapered roller bearings | 896/892D | - | 136.525×228.6×123.825 | 19.9 |
圆锥滚子轴承 | Tapered roller bearings | JRM3535/JRM3564XD | - | 35×64×18.5 | 0.511 |
圆锥滚子轴承 | Tapered roller bearings | JRM3939/JRM3968XD | - | 39×68×18.5 | 0.541 |
圆锥滚子轴承 | Tapered roller bearings | 8578/8520DC | - | 241.3×327.025×114.3 | 25 |
圆锥滚子轴承 | Tapered roller bearings | 64450/64700D | - | 114.3×177.8×92.075 | 7.45 |
圆锥滚子轴承 | Tapered roller bearings | NA46790-SW/46720CD | - | 165.1×225.425×95.25 | 10.51 |
圆锥滚子轴承 | Tapered roller bearings | NA48685SW/48620D | - | 147.875×200.025×43.665 | 8.82 |
圆锥滚子轴承 | Tapered roller bearings | 71437/71751D | - | 111.125×190.5×106.362 | 11.95 |
圆锥滚子轴承 | Tapered roller bearings | 74550/74851ZDC | - | 139.7×215.9×106.362 | 9.94 |
圆锥滚子轴承 | Tapered roller bearings | 82550/82932D | - | 139.702×236.538×131.763 | 23.4 |
圆锥滚子轴承 | Tapered roller bearings | 82562/82932D | - | 142.875×236.538×131.763 | 23.3 |
圆锥滚子轴承 | Tapered roller bearings | NA95500/95927CD | 97925 | 127×234.95×142.875 | 25.4 |
圆锥滚子轴承 | Tapered roller bearings | 99575/99102CD | - | 146.05×254×149.225 | 28 |
圆锥滚子轴承 | Tapered roller bearings | EE114080/EE114161DC | - | 203.2×406.4×169.85 | 107 |
圆锥滚子轴承 | Tapered roller bearings | EE126098/EE126161CD | - | 249.25×381×171.45 | 63.4 |
圆锥滚子轴承 | Tapered roller bearings | HM126048/HM124618XD | - | 119.062×195×142.875 | - |
圆锥滚子轴承 | Tapered roller bearings | HM129848/HM129814XD | - | 144.45×220.663×155.576 | 18.2 |
圆锥滚子轴承 | Tapered roller bearings | L163149/L163110D | - | 355.6×444.5×136.525 | 44.6 |
圆锥滚子轴承 | Tapered roller bearings | EE181453/EE19235LD | 97974 | 368.249×523.857×203.2 | 184 |
圆锥滚子轴承 | Tapered roller bearings | NA231400/231976CD | - | 355.6×501.65×146.05 | 88 |
圆锥滚子轴承 | Tapered roller bearings | JH211749/JH211710/DB | - | 65×120×86 | 3.89 |
圆锥滚子轴承 | Tapered roller bearings | KJH211749/KJH211710/DB | - | 65×120×86 | 3.89 |
圆锥滚子轴承 | Tapered roller bearings | KHM237545/KHM237510D | - | 177.8×288.925×142.875 | 31.4 |
圆锥滚子轴承 | Tapered roller bearings | HM237546DW/HM237510 | 3-759 | 177.8×288.295×123.825 | 31.5 |
圆锥滚子轴承 | Tapered roller bearings | HM237545/HM237510DC | 97136K | 177.8×288.925×142.875 | 30.8 |
圆锥滚子轴承 | Tapered roller bearings | HM237545/237510CD | - | 177.8×288.925×142.875 | 33 |
圆锥滚子轴承 | Tapered roller bearings | HM256849/HM256810D | 379411K | 203.2×276.225×95.25 | 14.8 |
圆锥滚子轴承 | Tapered roller bearings | LM239530T/LM239546TD-LM239549T | - | 181.808×259.969×161.925 | 24.4 |
圆锥滚子轴承 | Tapered roller bearings | EE243196/EE243251DC | D3-725 | 498.475×634.873×177.8 | 127 |
圆锥滚子轴承 | Tapered roller bearings | HH255149D/HH255110 | - | 279.4×457.2×244.75 | 180.75 |
圆锥滚子轴承 | Tapered roller bearings | HH258249TD/HH258210 | - | 303.212×495.3×263.525 | 223.84 |
圆锥滚子轴承 | Tapered roller bearings | HM256849/HM256810D | 97960 | 300.038×422.275×174.625 | 65.6 |
圆锥滚子轴承 | Tapered roller bearings | HM256849/HM256810D | E97960 | 300.038×422.275×174.625 | 65.6 |
圆锥滚子轴承 | Tapered roller bearings | HM262749TD/HM262710 | - | 331.536×488.95×174.625 | 102 |
圆锥滚子轴承 | Tapered roller bearings | HM269010R/HM261049D | 77970 | 333.375×469.9×342.9 | 194 |
圆锥滚子轴承 | Tapered roller bearings | HM262749TD/HM262710 | - | 346.175×488.95×174.625 | 103 |
圆锥滚子轴承 | Tapered roller bearings | HM265049/HM265010D/P | E3-743 | 368.249×523.875×214.312 | 143 |
圆锥滚子轴承 | Tapered roller bearings | HM2650497DS/HM265010S | - | 368.3×523.875×185.738 | 140 |
圆锥滚子轴承 | Tapered roller bearings | HM266449DW/HM266410 | - | 384.125×546.1×193.675 | 157.016 |
圆锥滚子轴承 | Tapered roller bearings | LM272249DW/LM27221-LM272210D | - | 482.6×615.95×33.02 | 252 |
圆锥滚子轴承 | Tapered roller bearings | M238840/M238810D | - | 177.8×269.875×119.062 | 22 |
圆锥滚子轴承 | Tapered roller bearings | M238848/M238810DC | - | 187.325×269.875×119.062 | 19.3 |
圆锥滚子轴承 | Tapered roller bearings | M249732/M249710CD | - | 228.6×358.775×152.4 | 56.7 |
圆锥滚子轴承 | Tapered roller bearings | M252349D/M252310 | - | 269.875×381×136.525 | 51.5 |
圆锥滚子轴承 | Tapered roller bearings | M252349DW/252310 | - | 269.875×381×282.575 | 101 |
圆锥滚子轴承 | Tapered roller bearings | M255449TD/M255410 | 87958K | 288.925×406.4×144.463 | 58 |
圆锥滚子轴承 | Tapered roller bearings | M255449TD/M255410 | - | 288.93×406.4×77.788 | 30.5 |
圆锥滚子轴承 | Tapered roller bearings | M268749DW/M268710 | - | 415.93×590.55×209.55 | 179 |
圆锥滚子轴承 | Tapered roller bearings | M270749ADW/M270710 | - | 447.675×635×223.838 | 238.3 |
圆锥滚子轴承 | Tapered roller bearings | M272749/M272710DC | E3-723 | 479.425×679.45×276.225 | 322 |
圆锥滚子轴承 | Tapered roller bearings | M278749D/M278710 | 3-754 | 571.5×812.8×285.25 | 491 |
圆锥滚子轴承 | Tapered roller bearings | M280049D/M280010 | 879/595 | 595.312×844.55×296.862 | 523 |
圆锥滚子轴承 | Tapered roller bearings | E323166D/323290 | 87984 | 419.227×736.448×406.4 | 799 |
圆锥滚子轴承 | Tapered roller bearings | NA329120/329173D | 3-769 | 304.8×438.048×161.925 | 65.4 |
圆锥滚子轴承 | Tapered roller bearings | L357049NW/L357010D | - | 304.8×393.7×50.8 | 14.6 |
圆锥滚子轴承 | Tapered roller bearings | L357049/L357010D | 37961K | 304.8×393.7×107.95 | 30 |
圆锥滚子轴承 | Tapered roller bearings | L357049/L357010D/C | 2G37961K | 304.8×393.7×107.95 | 30 |
圆锥滚子轴承 | Tapered roller bearings | EE420800D/EE421450 | 3-758 | 203.2×368.3×158.72 | 76.2 |
圆锥滚子轴承 | Tapered roller bearings | JM511946/JM511910/DB | - | 65×110×62 | 2.25 |
圆锥滚子轴承 | Tapered roller bearings | KJHM534149/KJHM534110/DB | - | 170×230×87 | 9.4 |
圆锥滚子轴承 | Tapered roller bearings | EE722115/EE722186CD | - | 292.1×469.9×200.025 | 122 |
圆锥滚子轴承 | Tapered roller bearings | LM772748/LM772710CD | - | 458.95×634.873×180.975 | 138 |
圆锥滚子轴承 | Tapered roller bearings | EE738101DW/EE738172 | 3-757 | 254×438.15×165.1 | 105 |
圆锥滚子轴承 | Tapered roller bearings | EE822101D/EE822175 | - | 254×444.5×133.35 | 88 |
圆锥滚子轴承 | Tapered roller bearings | EE843220/EE843292D | 3-737 | 558.8×742.95×187.328 | 205 |
圆锥滚子轴承 | Tapered roller bearings | EE843220/EE843292D/P6 | 3E3-737 | 558.8×742.95×187.328 | 205 |
圆锥滚子轴承 | Tapered roller bearings | EE843220/EE843292D/C3 | 3G3-737 | 558.8×742.95×187.328 | 205 |
圆锥滚子轴承 | Tapered roller bearings | HM926749/HM926710D | - | 127.792×228.6×115.888 | 18.94 |
圆锥滚子轴承 | Tapered roller bearings | HH949549/HH949510D | 97946 | 228.6×488.95×254 | 206 |
圆锥滚子轴承 | Tapered roller bearings | LM961548/LM961511D | - | 342.9×457.098×142.875 | 60.35 |
Double row tapered roller bearings
双列圆锥滚子轴承
轴承类型 | 国内新型号 | 国内旧型号 | 规格(dxDxTmax) | 重量(kg) | |
圆锥滚子轴承 | Tapered roller bearings | 352224D | 57524 | 120×215×312 | - |
圆锥滚子轴承 | Tapered roller bearings | 350620D1 | 37720 | 100×190×125 | 14.94 |
圆锥滚子轴承 | Tapered roller bearings | 350626D1 | 37726 | 130×235×145 | 24.7 |
圆锥滚子轴承 | Tapered roller bearings | 350630D1 | 37730 | 150×255×145 | 26.5 |
圆锥滚子轴承 | Tapered roller bearings | 352132X2D1 | 37732 | 160×270×140 | - |
圆锥滚子轴承 | Tapered roller bearings | 352936X2D1/YA1 | 37836K | 180×250×95 | 13.8 |
圆锥滚子轴承 | Tapered roller bearings | 350636D1 | 37736 | 180×285×108 | 32.2 |
圆锥滚子轴承 | Tapered roller bearings | 350641D1 | 37741 | 205×320×150 | 40.2 |
圆锥滚子轴承 | Tapered roller bearings | 3506/203.2D1/YA3 | 37941K | 203.2×276.225×95.25 | 14.8 |
圆锥滚子轴承 | Tapered roller bearings | 350645D1 | 37745 | 225×360×146.5 | 48.2 |
圆锥滚子轴承 | Tapered roller bearings | 350646D1 | 37746 | 230×360×146.5 | 43.5 |
圆锥滚子轴承 | Tapered roller bearings | 350652D1 | 37752 | 260×430×180 | 87.9 |
圆锥滚子轴承 | Tapered roller bearings | 3506/254D1 | 37752 | 254×431.724×180 | 88 |
圆锥滚子轴承 | Tapered roller bearings | 350660D1 | 37860 | 300×440×140 | 58.4 |
圆锥滚子轴承 | Tapered roller bearings | 352052X2D1 | 37852 | 260×400×150 | 60.3 |
圆锥滚子轴承 | Tapered roller bearings | 350668D1 | 37768 | 340×500×155 | 94.5 |
圆锥滚子轴承 | Tapered roller bearings | 350672D1 | 37772 | 360×530×155 | 109 |
圆锥滚子轴承 | Tapered roller bearings | 351084X2D1 | 37784 | 420×620×190 | 171 |
圆锥滚子轴承 | Tapered roller bearings | 350680D1 | 37780 | 400×590×185 | 166 |
圆锥滚子轴承 | Tapered roller bearings | 352930X2D | 2057930 | 150×210×80 | 9.12 |
圆锥滚子轴承 | Tapered roller bearings | 352034X2D | 2057134 | 170×260×120 | - |
圆锥滚子轴承 | Tapered roller bearings | 350307X2D | 57707 | 35×80×57 | 1.23 |
圆锥滚子轴承 | Tapered roller bearings | 372218 | 87518 | 90×160×94 | 3.87 |
圆锥滚子轴承 | Tapered roller bearings | 372218 | 87518E | 90×160×94 | 3.87 |
圆锥滚子轴承 | Tapered roller bearings | 372011X2 | 3187111 | 55×90×54 | 1.73 |
圆锥滚子轴承 | Tapered roller bearings | 372016X2 | 2187116 | 80×125×58 | 2.61 |
圆锥滚子轴承 | Tapered roller bearings | 372222X3 | 87722 | 110×210×118 | 25.1 |
圆锥滚子轴承 | Tapered roller bearings | 372224X2 | 187224E | 120×215×87 | 13.4 |
圆锥滚子轴承 | Tapered roller bearings | 371180X2 | 87880 | 400×650×200 | 270 |
圆锥滚子轴承 | Tapered roller bearings | 371180X2/HCYA | 187880SK | 400×650×240 | 276 |
圆锥滚子轴承 | Tapered roller bearings | 371184X2 | 87884 | 420×700×224 | 382 |
圆锥滚子轴承 | Tapered roller bearings | 371188X2 | 87788 | 440×720×226 | 367 |
圆锥滚子轴承 | Tapered roller bearings | 371180X2/HCYA | 187880SK | 400×650×240 | 276 |
圆锥滚子轴承 | Tapered roller bearings | 3711/500X2 | 878/500 | 500×830×330 | 611 |
圆锥滚子轴承 | Tapered roller bearings | - | 178880SU | 400×650×240 | 168 |
圆锥滚子轴承 | Tapered roller bearings | 370622 | 87722 | 110×240×118 | 25.1 |
圆锥滚子轴承 | Tapered roller bearings | 3706/260.35 | 87952 | 260.35×444.5×196.85 | 123 |
圆锥滚子轴承 | Tapered roller bearings | 3706/228.925 | 87958K | 228.925×406.4×114.463 | 58 |
圆锥滚子轴承 | Tapered roller bearings | 3706/550B/HCC2 | 1879/550 | 550×920×330 | 909 |
圆锥滚子轴承 | Tapered roller bearings | - | K87718-1Y | 88.9×279.4×101.6 | - |
圆锥滚子轴承 | Tapered roller bearings | 3706/305.07 | 87961K | 305.07×500×200 | 122 |
圆锥滚子轴承 | Tapered roller bearings | 370660/YA | - | 300×440×105 | 42.6 |
圆锥滚子轴承 | Tapered roller bearings | 3706/500 | 879/500 | 500×730×280 | 420 |
圆锥滚子轴承 | Tapered roller bearings | 3706/501.625 | 879/500 | 501.625×711.2×250.825 | 323 |
圆锥滚子轴承 | Tapered roller bearings | 3706/501.625/P6 | E879/500 | 501.625×711.2×250.825 | 323 |
圆锥滚子轴承 | Tapered roller bearings | 3706/501.13/HC | 1879/510.13 | 510.3×800×285 | 516 |
圆锥滚子轴承 | Tapered roller bearings | 3506/520 | 977/520 | 520×740×190 | 237 |
圆锥滚子轴承 | Tapered roller bearings | 3506/530 | 878/530 | 530×730×250 | 323 |
圆锥滚子轴承 | Tapered roller bearings | 3706/670B/YA | 1877/670 | 670×980×230 | 553 |
圆锥滚子轴承 | Tapered roller bearings | 3706/570 | 877/570 | 570×750×280 | 287 |
圆锥滚子轴承 | Tapered roller bearings | 351976 | 1097976 | 380×520×145 | 80.3 |
圆锥滚子轴承 | Tapered roller bearings | 351980 | 1097980 | 400×540×150 | 86.9 |
圆锥滚子轴承 | Tapered roller bearings | 31980/P59 | D109780U | 400×540×150 | 86.9 |
圆锥滚子轴承 | Tapered roller bearings | 351984 | 1097984 | 420×560×145 | 88.8 |
圆锥滚子轴承 | Tapered roller bearings | 351984/P59 | D1097984U | 420×560×145 | 88.8 |
圆锥滚子轴承 | Tapered roller bearings | 351988 | 1097988 | 440×600×170 | 114 |
圆锥滚子轴承 | Tapered roller bearings | 351992 | 1097992 | 460×620×170 | 134 |
圆锥滚子轴承 | Tapered roller bearings | 351996 | 1097996 | 480×650×180 | 151 |
圆锥滚子轴承 | Tapered roller bearings | 3519/500 | 10979/500 | 500×670×180 | 157 |
圆锥滚子轴承 | Tapered roller bearings | 3519/500/HC | 10979/500S | 500×670×180 | 160 |
圆锥滚子轴承 | Tapered roller bearings | 3519/530 | 10979/530 | 530×710×190 | 192 |
圆锥滚子轴承 | Tapered roller bearings | 3519/530J | 10979/530 | 530×710×190 | 192 |
圆锥滚子轴承 | Tapered roller bearings | 3519/560 | 10979/560 | 560×750×213 | 235 |
圆锥滚子轴承 | Tapered roller bearings | 3519/600 | 10979/600 | 600×800×205 | 265 |
圆锥滚子轴承 | Tapered roller bearings | 3519/600HC | 10979/600S | 600×800×205 | 271 |
圆锥滚子轴承 | Tapered roller bearings | 3519/630 | 10979/630 | 630×850×242 | 368 |
圆锥滚子轴承 | Tapered roller bearings | 3519/630/C2 | 2G10979/630 | 630×850×242 | 368 |
圆锥滚子轴承 | Tapered roller bearings | 3519/670 | 10979/670 | 670×900×240 | 416 |
圆锥滚子轴承 | Tapered roller bearings | 3519/710 | 10979/710 | 710×950×240 | 444 |
圆锥滚子轴承 | Tapered roller bearings | 3519/750 | 10979/750 | 750×1000×264 | 499 |
圆锥滚子轴承 | Tapered roller bearings | 3519/750HC | 10979/750S | 750×1000×264 | 546 |
圆锥滚子轴承 | Tapered roller bearings | 3519/800/S0 | 10979/800T | 800×1060×270 | 604 |
圆锥滚子轴承 | Tapered roller bearings | 3519/800/C3S0 | 3G10979/800T | 800×1060×270 | 604 |
圆锥滚子轴承 | Tapered roller bearings | 3519/800 | 10979/800 | 800×1060×270 | 604 |
圆锥滚子轴承 | Tapered roller bearings | 3519/850 | 10979/850 | 850×1120×268 | 636 |
圆锥滚子轴承 | Tapered roller bearings | 3519/900 | 10979/900 | 900×1180×275 | 763 |
圆锥滚子轴承 | Tapered roller bearings | 3519/950/HC | 10979/950S | 950×1250×300 | 911 |
圆锥滚子轴承 | Tapered roller bearings | 3519/950 | 10979/950 | 950×1250×300 | 909 |
圆锥滚子轴承 | Tapered roller bearings | 3519/1120 | 10979/1120 | 1120×1460×335 | 1344 |
圆锥滚子轴承 | Tapered roller bearings | 352926 | 2097926E | 130×180×70 | 4.87 |
圆锥滚子轴承 | Tapered roller bearings | 352928 | 2097928E | 140×190×73 | 6.2 |
圆锥滚子轴承 | Tapered roller bearings | 352930 | 2097930 | 150×210×80 | 9.32 |
圆锥滚子轴承 | Tapered roller bearings | 352932 | 2097932 | 160×220×82 | 8.15 |
圆锥滚子轴承 | Tapered roller bearings | 352934 | 2097934 | 170×230×82 | 8.11 |
圆锥滚子轴承 | Tapered roller bearings | 352936 | 2097936 | 180×250×90 | 13 |
圆锥滚子轴承 | Tapered roller bearings | 352938 | 2097938 | 190×260×95 | 13.3 |
圆锥滚子轴承 | Tapered roller bearings | 352940 | 2097940 | 200×280×105 | 18.8 |
圆锥滚子轴承 | Tapered roller bearings | 352940 | 2097940EK | 200×280×116 | 22 |
圆锥滚子轴承 | Tapered roller bearings | 352944 | 2097944 | 220×300×110 | 21.7 |
圆锥滚子轴承 | Tapered roller bearings | 352948 | 2097948 | 240×320×110 | 22.2 |
圆锥滚子轴承 | Tapered roller bearings | 352948 | 2097948K | 240×320×110 | 22.2 |
圆锥滚子轴承 | Tapered roller bearings | 352952 | 2097952 | 260×360×134 | 37 |
圆锥滚子轴承 | Tapered roller bearings | 352952 | 2097952K | 260×360×134 | 37 |
圆锥滚子轴承 | Tapered roller bearings | 352956 | 2097956 | 280×380×134 | 41.3 |
圆锥滚子轴承 | Tapered roller bearings | 352960 | 2097960 | 300×460×160 | 63 |
圆锥滚子轴承 | Tapered roller bearings | 352964 | 2097964 | 320×460×160 | 67 |
圆锥滚子轴承 | Tapered roller bearings | 352968 | 2097968 | 360×460×160 | 71 |
圆锥滚子轴承 | Tapered roller bearings | 352972 | 2097972 | 360×480×160 | 74.3 |
圆锥滚子轴承 | Tapered roller bearings | 351056 | 97156 | 280×420×133 | 58.1 |
圆锥滚子轴承 | Tapered roller bearings | 351068 | 97168 | 340×520×180 | 119 |
圆锥滚子轴承 | Tapered roller bearings | 351072 | 97172 | 360×540×185 | 127 |
圆锥滚子轴承 | Tapered roller bearings | 351072/YA1 | 97172Y | 360×540×185 | 127 |
圆锥滚子轴承 | Tapered roller bearings | 351076 | 97176 | 380×560×190 | 146 |
圆锥滚子轴承 | Tapered roller bearings | 351080 | 97180 | 400×600×206 | 180 |
圆锥滚子轴承 | Tapered roller bearings | 351080 | 97184 | 420×650×206 | 187 |
圆锥滚子轴承 | Tapered roller bearings | 351088 | 97188 | 440×650×212 | 213 |
圆锥滚子轴承 | Tapered roller bearings | 351092 | 97192 | 460×680×230 | 253 |
圆锥滚子轴承 | Tapered roller bearings | 351092 | 97192K | 460×680×230 | 267 |
圆锥滚子轴承 | Tapered roller bearings | 351096 | 97196 | 480×700×240 | 281 |
圆锥滚子轴承 | Tapered roller bearings | 3510/500 | 971/500 | 500×720×236 | 289 |
圆锥滚子轴承 | Tapered roller bearings | 3510/500J | 971/500 | 500×720×236 | 276 |
圆锥滚子轴承 | Tapered roller bearings | 3510/530 | 971/530 | 530×780×255 | 410 |
圆锥滚子轴承 | Tapered roller bearings | 3510/560 | 971/560 | 560×820×260 | 410 |
圆锥滚子轴承 | Tapered roller bearings | 3510/600 | 971/600 | 600×870×270 | 500 |
圆锥滚子轴承 | Tapered roller bearings | 3510/630 | 971/630 | 630×920×295 | 560 |
圆锥滚子轴承 | Tapered roller bearings | 3510/670 | 971/670 | 670×980×310 | 710 |
圆锥滚子轴承 | Tapered roller bearings | 3510/710 | 971/710 | 710×1030×315 | 810 |
圆锥滚子轴承 | Tapered roller bearings | 352015 | 2097115E | 75×115×58 | 1.984 |
圆锥滚子轴承 | Tapered roller bearings | 352026 | 2097126E | 130×200×102 | 9.72 |
圆锥滚子轴承 | Tapered roller bearings | 352026 | 2097126 | 130×200×95 | 9.72 |
圆锥滚子轴承 | Tapered roller bearings | 352028 | 2097128 | 140×210×95 | 10.9 |
圆锥滚子轴承 | Tapered roller bearings | 352028 | 20097128E | 140×210×95 | 11.6 |
圆锥滚子轴承 | Tapered roller bearings | 352028 | 2097128K1 | 140×210×95 | 10.3 |
圆锥滚子轴承 | Tapered roller bearings | 352030 | 2097130E | 150×225×110 | - |
圆锥滚子轴承 | Tapered roller bearings | 352032 | 2097132 | 160×240×116 | 16.5 |
圆锥滚子轴承 | Tapered roller bearings | 352032 | 2097132E | 160×240×116 | 17.1 |
圆锥滚子轴承 | Tapered roller bearings | 352032/YA | 2097132E | 160×240×116 | 16.9 |
圆锥滚子轴承 | Tapered roller bearings | 352034 | 2097134 | 170×260×128 | 20.4 |
圆锥滚子轴承 | Tapered roller bearings | 352034/YA | 2097134K | 170×260×128 | 21 |
圆锥滚子轴承 | Tapered roller bearings | 352034 | 2097134E | 170×260×128 | 20.4 |
圆锥滚子轴承 | Tapered roller bearings | 352036 | 2097136E | 180×280×142 | 29.3 |
圆锥滚子轴承 | Tapered roller bearings | 352036 | 2097136 | 180×280×142 | 28.5 |
圆锥滚子轴承 | Tapered roller bearings | 352038 | 2097138 | 190×290×142 | 28.8 |
圆锥滚子轴承 | Tapered roller bearings | 352038 | 2097138E | 190×290×142 | 28.8 |
圆锥滚子轴承 | Tapered roller bearings | 352040 | 2097140 | 200×310×152 | 39 |
圆锥滚子轴承 | Tapered roller bearings | 352040 | 2097140E | 200×310×154 | 38.5 |
圆锥滚子轴承 | Tapered roller bearings | 352044 | 2097144E | 220×340×166 | 42.86 |
圆锥滚子轴承 | Tapered roller bearings | 352044 | 2097144 | 220×340×166 | 47.7 |
圆锥滚子轴承 | Tapered roller bearings | 352048 | 2097148 | 220×340×166 | 52.8 |
圆锥滚子轴承 | Tapered roller bearings | 352048 | 2097148E | 220×340×166 | 53.9 |
圆锥滚子轴承 | Tapered roller bearings | 352052 | 2097152E | 260×400×190 | 79.7 |
圆锥滚子轴承 | Tapered roller bearings | 352052 | 2097152 | 260×400×190 | 79.3 |
圆锥滚子轴承 | Tapered roller bearings | 352056 | 2097156 | 280×420×190 | 81.5 |
圆锥滚子轴承 | Tapered roller bearings | 352056 | 2097156E | 280×420×190 | 81.5 |
圆锥滚子轴承 | Tapered roller bearings | 352060 | 2097160E | 300×460×220 | 117 |
圆锥滚子轴承 | Tapered roller bearings | 352060 | 2097160 | 300×466×210 | 117.2 |
圆锥滚子轴承 | Tapered roller bearings | 352064 | 2097164 | 320×480×210 | 122 |
圆锥滚子轴承 | Tapered roller bearings | 352064/C2 | 2G2097164 | 320×480×210 | 122 |
圆锥滚子轴承 | Tapered roller bearings | 352064 | 2097164U | 320×480×210 | 122 |
圆锥滚子轴承 | Tapered roller bearings | 352064 | 2097164E | 320×480×220 | 122 |
圆锥滚子轴承 | Tapered roller bearings | 352072 | 2097172 | 360×540×220 | 162 |
圆锥滚子轴承 | Tapered roller bearings | 351160 | 1097760 | 300×500×205 | 142.8 |
圆锥滚子轴承 | Tapered roller bearings | 351168 | 1097768 | 340×580×242 | 214 |
圆锥滚子轴承 | Tapered roller bearings | 351172 | 1097772 | 360×600×242 | 221 |
圆锥滚子轴承 | Tapered roller bearings | 351176 | 1097776 | 380×620×242 | 250 |
圆锥滚子轴承 | Tapered roller bearings | 351180 | 1097780 | 400×650×255 | 279 |
圆锥滚子轴承 | Tapered roller bearings | 351184HC | 1097784S | 420×700×275 | 394 |
圆锥滚子轴承 | Tapered roller bearings | 351184 | 1097784 | 420×700×275 | 376 |
圆锥滚子轴承 | Tapered roller bearings | 352114 | 2097714 | - | - |
圆锥滚子轴承 | Tapered roller bearings | 352122 | 2097722 | 110×180×95 | 10 |
圆锥滚子轴承 | Tapered roller bearings | 352122 | 2097722K | 110×180×95 | 8.94 |
圆锥滚子轴承 | Tapered roller bearings | 352124 | 2097724 | 120×200×110 | 12.6 |
圆锥滚子轴承 | Tapered roller bearings | 352126 | 2097726 | 130×210×110 | 13.9 |
圆锥滚子轴承 | Tapered roller bearings | 352128 | 2097728 | 140×225×115 | 15.3 |
圆锥滚子轴承 | Tapered roller bearings | 352130 | 2097730 | 150×250×138 | 25.8 |
圆锥滚子轴承 | Tapered roller bearings | 352132 | 2097732 | 160×270×150 | 28.3 |
圆锥滚子轴承 | Tapered roller bearings | 352132/YA1 | 2097732 | 160×270×150 | - |
圆锥滚子轴承 | Tapered roller bearings | 352132/YB | 2097732Y | 160×270×150 | - |
圆锥滚子轴承 | Tapered roller bearings | 352134 | 2097734 | 170×280×150 | 35.6 |
圆锥滚子轴承 | Tapered roller bearings | 352134/W33 | 2097734Y | 170×280×150 | 33.9 |
圆锥滚子轴承 | Tapered roller bearings | 352134 | 2097734K | 170×280×150 | 34.9 |
圆锥滚子轴承 | Tapered roller bearings | 352136 | 2097736 | 180×300×160 | 39.9 |
圆锥滚子轴承 | Tapered roller bearings | 352138 | 2097738 | 190×320×170 | 52 |
圆锥滚子轴承 | Tapered roller bearings | 352138 | 2097738E | 190×320×170 | 53.6 |
圆锥滚子轴承 | Tapered roller bearings | 352140 | 2097740 | 200×340×184 | 63.8 |
圆锥滚子轴承 | Tapered roller bearings | 352140/YA1 | 2097740 | 200×340×184 | - |
圆锥滚子轴承 | Tapered roller bearings | 352144 | 2097744 | 220×370×195 | 76.3 |
圆锥滚子轴承 | Tapered roller bearings | 352148 | 2097748 | 240×400×210 | 98.1 |
圆锥滚子轴承 | Tapered roller bearings | 352152 | 2097752 | 260×440×225 | 124 |
圆锥滚子轴承 | Tapered roller bearings | 352208 | 97508E | 40×80×55 | - |
圆锥滚子轴承 | Tapered roller bearings | 352208 | 97508 | 40×80×55 | 1.21 |
圆锥滚子轴承 | Tapered roller bearings | 352209 | 97509E | 45×85×55 | - |
圆锥滚子轴承 | Tapered roller bearings | 352210 | 97510 | 50×90×55 | 1.43 |
圆锥滚子轴承 | Tapered roller bearings | 352210 | 97510E | 50×90×55 | - |
圆锥滚子轴承 | Tapered roller bearings | 352212 | 97512 | 60×110×66 | 2.165 |
圆锥滚子轴承 | Tapered roller bearings | 352211 | 97511E | 55×100×60 | - |
圆锥滚子轴承 | Tapered roller bearings | 352213 | 97513 | 65×120×70 | 3.36 |
圆锥滚子轴承 | Tapered roller bearings | 352213 | 97513E | 65×120×73 | - |
圆锥滚子轴承 | Tapered roller bearings | 352214 | 97514 | 65×125×70 | 3.49 |
圆锥滚子轴承 | Tapered roller bearings | 352214 | 97514E | 70×125×74 | - |
圆锥滚子轴承 | Tapered roller bearings | 352215 | 97515 | 75×130×75 | 3.61 |
圆锥滚子轴承 | Tapered roller bearings | 352215 | 97515E | 75×130×74 | - |
圆锥滚子轴承 | Tapered roller bearings | 352215X2L1/P2 | 97515L | 75×130×75 | 3.62 |
圆锥滚子轴承 | Tapered roller bearings | 352216 | 97516 | 80×140×80 | 4.97 |
圆锥滚子轴承 | Tapered roller bearings | 352216 | 97516E | 80×140×78 | - |
圆锥滚子轴承 | Tapered roller bearings | 352217 | 97517 | 85×150×85 | 6.01 |
圆锥滚子轴承 | Tapered roller bearings | 352217 | 97517E | 85×150×86 | 5.86 |
圆锥滚子轴承 | Tapered roller bearings | 352218X2 | 97518E | 90×160×95 | 7.62 |
圆锥滚子轴承 | Tapered roller bearings | 352218 | 97518EK | 90×160×94 | 7.8 |
圆锥滚子轴承 | Tapered roller bearings | 352218 | 97518 | 90×160×94 | - |
圆锥滚子轴承 | Tapered roller bearings | 352218 | 97518E | 90×160×94 | 7.5 |
圆锥滚子轴承 | Tapered roller bearings | 352219 | 97519E | 95×170×100 | 9.02 |
圆锥滚子轴承 | Tapered roller bearings | 352220 | 97520 | 100×180×107 | - |
圆锥滚子轴承 | Tapered roller bearings | 352220 | 97520E | 100×180×107 | - |
圆锥滚子轴承 | Tapered roller bearings | 352221 | 97521E | 105×190×115 | - |
圆锥滚子轴承 | Tapered roller bearings | 352222 | 97522 | 110×200×121 | 15.9 |
圆锥滚子轴承 | Tapered roller bearings | 352222 | 97522E | 110×200×121 | 15.9 |
圆锥滚子轴承 | Tapered roller bearings | 352224 | 97524 | 120×215×132 | 19.1 |
圆锥滚子轴承 | Tapered roller bearings | 352224 | 97524E | 120×215×132 | 19.6 |
圆锥滚子轴承 | Tapered roller bearings | 352224/YA | 97524EK | 120×215×132 | 19.2 |
圆锥滚子轴承 | Tapered roller bearings | 352226 | 97526E | 130×230×145 | 24.7 |
圆锥滚子轴承 | Tapered roller bearings | 352228 | 97528E | 140×250×153 | 30.1 |
圆锥滚子轴承 | Tapered roller bearings | 352230 | 97530E | 150×270×164 | 40 |
圆锥滚子轴承 | Tapered roller bearings | 352232 | 97532E | 160×290×178 | 48 |
圆锥滚子轴承 | Tapered roller bearings | 352234 | 97534E | 170×310×192 | 58.2 |
圆锥滚子轴承 | Tapered roller bearings | 352236 | 97536E | 180×320×192 | 62.7 |
圆锥滚子轴承 | Tapered roller bearings | 352236/S0 | 97536KT | 180×320×192 | 60 |
圆锥滚子轴承 | Tapered roller bearings | 352236 | 97536K | 180×320×192 | 60 |
圆锥滚子轴承 | Tapered roller bearings | 352238 | 97538E | 190×340×204 | 69.8 |
圆锥滚子轴承 | Tapered roller bearings | 352240 | 97540E | 200×360×218 | 93.3 |
圆锥滚子轴承 | Tapered roller bearings | 351980X2 | 1007980 | 400×540×70 | - |
圆锥滚子轴承 | Tapered roller bearings | 352960X2 | 97860EY | 300×400×100 | 32.1 |
圆锥滚子轴承 | Tapered roller bearings | 352926X2 | 2097926 | 130×180×70 | 4.87 |
圆锥滚子轴承 | Tapered roller bearings | 3529X2 | 2097932 | 160×220×82 | 8.15 |
圆锥滚子轴承 | Tapered roller bearings | 352934X2 | 87834 | 170×230×65 | 6.79 |
圆锥滚子轴承 | Tapered roller bearings | 352934X2 | 2097934 | 170×230×82 | 8.11 |
圆锥滚子轴承 | Tapered roller bearings | 352936X2 | 2097936 | 180×250×95 | 13 |
圆锥滚子轴承 | Tapered roller bearings | 352936X2/YA1 | 2097936K | 180×250×95 | 14.2 |
圆锥滚子轴承 | Tapered roller bearings | 352938X2 | 2097938 | 190×260×95 | 13.3 |
圆锥滚子轴承 | Tapered roller bearings | 352940X2 | 2097940 | 200×280×110 | 18.1 |
圆锥滚子轴承 | Tapered roller bearings | 352940X2/YA1 | 2097940K | 200×280×110 | 19.7 |
圆锥滚子轴承 | Tapered roller bearings | 352940X2/YA1 | 2097940EK | 200×280×116 | 22 |
圆锥滚子轴承 | Tapered roller bearings | 352944X2 | 2097944 | 220×300×110 | 21.2 |
圆锥滚子轴承 | Tapered roller bearings | 352948X2 | 25097948 | 240×320×105 | 22.3 |
圆锥滚子轴承 | Tapered roller bearings | 352948X2/YB2 | 2097948 | 240×320×105 | 22 |
圆锥滚子轴承 | Tapered roller bearings | 352948X2/YA1 | 2097948K | 240×320×110 | 23 |
圆锥滚子轴承 | Tapered roller bearings | 352948X2 | 2097948K | 240×320×110 | 22.3 |
圆锥滚子轴承 | Tapered roller bearings | 352948X2/YA | 2097948K1 | 240×320×110 | 23.2 |
圆锥滚子轴承 | Tapered roller bearings | 352952X2/YB2 | 2097952 | 260×360×108 | 39.1 |
圆锥滚子轴承 | Tapered roller bearings | 352952X2 | 2097952 | 260×360×108 | 40.11 |
圆锥滚子轴承 | Tapered roller bearings | 352952X2/YAYB2 | 2097952K | 260×360×108 | 38.9 |
圆锥滚子轴承 | Tapered roller bearings | 352952X2 | 2097952 | 260×360×134 | 39.9 |
圆锥滚子轴承 | Tapered roller bearings | 352952X2/YA1 | 2097952K | 260×360×134 | 39.7 |
圆锥滚子轴承 | Tapered roller bearings | 352952X2-2 | 97852 | 260×360×105 | 15 |
圆锥滚子轴承 | Tapered roller bearings | 352956X2 | 2097956 | 280×380×134 | 44 |
圆锥滚子轴承 | Tapered roller bearings | 352956X2/P59 | D2097956U | 280×380×134 | 41.3 |
圆锥滚子轴承 | Tapered roller bearings | 352960X2 | 2097960 | 300×420×160 | 60.8 |
圆锥滚子轴承 | Tapered roller bearings | 352960X2/P59 | D2097960U | 300×420×160 | 63 |
圆锥滚子轴承 | Tapered roller bearings | 352960X2 | 97860 | 300×420×175 | 75.3 |
圆锥滚子轴承 | Tapered roller bearings | 352960X2-2 | 97860 | 300×420×175 | 70 |
圆锥滚子轴承 | Tapered roller bearings | 352960X2-2 | 97760 | 300×420×175 | 65.6 |
圆锥滚子轴承 | Tapered roller bearings | 352964X2 | 2097964 | 320×440×160 | 67 |
圆锥滚子轴承 | Tapered roller bearings | 352964X2/C2 | 2g2097964 | 320×440×160 | 67 |
圆锥滚子轴承 | Tapered roller bearings | 352968X2 | 2097968 | 340×460×160 | 71 |
圆锥滚子轴承 | Tapered roller bearings | 352972X2 | 2097972 | 360×480×160 | 74.7 |
圆锥滚子轴承 | Tapered roller bearings | 3529/1600X2 | 978/1600 | 1600×2060×560 | 4210 |
圆锥滚子轴承 | Tapered roller bearings | 351072X2 | 97872 | 360×540×134 | 122 |
圆锥滚子轴承 | Tapered roller bearings | 351080X2 | 97880 | 400×600×230 | 206 |
圆锥滚子轴承 | Tapered roller bearings | 351072X2 | 97872 | 360×540×169 | 122 |
圆锥滚子轴承 | Tapered roller bearings | 351076X2 | 97876 | 380×560×171 | 136 |
圆锥滚子轴承 | Tapered roller bearings | 3510/710X2/C3 | 3G977/710 | 710×1030×236 | - |
圆锥滚子轴承 | Tapered roller bearings | 3510/710X2 | 977/710 | 710×1030×236 | 651 |
圆锥滚子轴承 | Tapered roller bearings | 352026X2 | 2097126 | 130×200×95 | 9.72 |
圆锥滚子轴承 | Tapered roller bearings | 352030 | 97830 | 150×225×112 | 14.1 |
圆锥滚子轴承 | Tapered roller bearings | 352028X2/YA | 2097128k | 140×210×75 | 10.3 |
圆锥滚子轴承 | Tapered roller bearings | 352028X2 | 2097128 | 140×210×95 | 8.36 |
圆锥滚子轴承 | Tapered roller bearings | 352032X2 | 2097132 | 160×240×115 | 16.5 |
圆锥滚子轴承 | Tapered roller bearings | 352034X2 | 2097134 | 170×260×120 | 20.4 |
圆锥滚子轴承 | Tapered roller bearings | 352036X2 | 2097136 | 180×280×134 | 28.5 |
圆锥滚子轴承 | Tapered roller bearings | 352014X2 | 209713897814 | 70×110×98 | 1.06 |
圆锥滚子轴承 | Tapered roller bearings | 352040X2/YA | 2097140 | 200×310×152 | 38.5 |
圆锥滚子轴承 | Tapered roller bearings | 352040X2 | 2097140 | 200×310×152 | 39.1 |
圆锥滚子轴承 | Tapered roller bearings | 352040X2 | 2097140k | 200×310×152 | 38.9 |
圆锥滚子轴承 | Tapered roller bearings | 352044X2/YA | 2097144 | 220×340×165 | 49.6 |
圆锥滚子轴承 | Tapered roller bearings | 352044X2 | 2097144 | 220×340×165 | 47.7 |
圆锥滚子轴承 | Tapered roller bearings | 352048X2 | 2097148 | 240×360×165 | 52.8 |
圆锥滚子轴承 | Tapered roller bearings | 352048X2/YA | 2097148 | 240×360×165 | 53.9 |
圆锥滚子轴承 | Tapered roller bearings | 352052X2/YA | 2097152 | 260×400×186 | 79.7 |
圆锥滚子轴承 | Tapered roller bearings | 352052X2 | 2097152 | 260×400×186 | 79.3 |
圆锥滚子轴承 | Tapered roller bearings | 352056X2/YA | 2097156 | 280×420×186 | 82.7 |
圆锥滚子轴承 | Tapered roller bearings | 352056X2 | 2097156 | 280×420×186 | 81.5 |
圆锥滚子轴承 | Tapered roller bearings | 352060X2 | 2097160 | 300×460×210 | 118 |
圆锥滚子轴承 | Tapered roller bearings | 352060X2/C4 | 4G2097160 | 300×460×210 | 117 |
圆锥滚子轴承 | Tapered roller bearings | 352064X2 | 97764 | 320×480×151 | 88.9 |
圆锥滚子轴承 | Tapered roller bearings | 352064X2 | 2097164 | 320×480×151 | 122 |
圆锥滚子轴承 | Tapered roller bearings | 352064X2/YA | 2097164 | 320×480×151 | 121 |
圆锥滚子轴承 | Tapered roller bearings | 352064X2/C9 | 2097164U | 320×480×151 | 122 |
圆锥滚子轴承 | Tapered roller bearings | 352064X2F1 | 2097164W1 | 320×480×151 | 119.6 |
圆锥滚子轴承 | Tapered roller bearings | 352064X2/C3 | 3G2097164 | 320×480×151 | 122 |
圆锥滚子轴承 | Tapered roller bearings | 352072X2/YA | 2097172 | 360×540×220 | 162 |
圆锥滚子轴承 | Tapered roller bearings | 352072X2 | 2097172 | 360×540×220 | 162 |
圆锥滚子轴承 | Tapered roller bearings | 352080X2 | 97880 | 400×600×230 | 206 |
圆锥滚子轴承 | Tapered roller bearings | 351160X2 | 97860 | 300×500×200 | 142 |
圆锥滚子轴承 | Tapered roller bearings | 371180X2B/HCC9 | 187780SU | 400×650×200 | 268 |
圆锥滚子轴承 | Tapered roller bearings | 3511/500X2 | 978/500 | 500×830×330 | 611 |
圆锥滚子轴承 | Tapered roller bearings | 352122X2/YA | 2097722K | 110×180×76 | 8.94 |
圆锥滚子轴承 | Tapered roller bearings | 352130X2 | 97730 | 150×250×109 | 24.5 |
圆锥滚子轴承 | Tapered roller bearings | 35213X2/C3S0 | 3G97730T | 150×250×109 | 24.5 |
圆锥滚子轴承 | Tapered roller bearings | 351232X2 | 2097732 | 160×270×150 | 31.8 |
圆锥滚子轴承 | Tapered roller bearings | 352132X2/HA | - | 160×270×150 | 31.8 |
圆锥滚子轴承 | Tapered roller bearings | 352134X2/YA | 2097734K | 170×280×150 | 34.9 |
圆锥滚子轴承 | Tapered roller bearings | 350210X2 | 97210 | 50×90×49 | 1.24 |
圆锥滚子轴承 | Tapered roller bearings | 350210X2 | 97210E | 50×90×49 | - |
圆锥滚子轴承 | Tapered roller bearings | 350222X2 | 97222E | 110×200×92 | 8.4 |
圆锥滚子轴承 | Tapered roller bearings | 352214X2 | 97514EK | 70×125×75 | 3.606 |
圆锥滚子轴承 | Tapered roller bearings | 372216X2 | 187216E | 80×140×56.75 | 3.28 |
圆锥滚子轴承 | Tapered roller bearings | 372216X2/P6 | E187216E | 80×140×56.75 | 3.28 |
圆锥滚子轴承 | Tapered roller bearings | 352216X2 | 97516 | 80×140×80 | 4.97 |
圆锥滚子轴承 | Tapered roller bearings | 352216X2 | 97516E | 80×140×80 | 4.97 |
圆锥滚子轴承 | Tapered roller bearings | 352217X2/YA | 97517EK | 85×150×84 | 5.59 |
圆锥滚子轴承 | Tapered roller bearings | 352218X2 | 97518E | 90×160×95 | 7.49 |
圆锥滚子轴承 | Tapered roller bearings | 352220X2-2 | 97820 | 100×180×67.3 | 6.51 |
圆锥滚子轴承 | Tapered roller bearings | 352220X2 | 97820 | 100×180×83 | 6.51 |
圆锥滚子轴承 | Tapered roller bearings | 352220X2 | 97520EK | 100×180×111 | 11.6 |
圆锥滚子轴承 | Tapered roller bearings | 352220X2 | 97520E | 100×180×112 | 11.4 |
圆锥滚子轴承 | Tapered roller bearings | 352221X2 | 97521EK | 105×190×117 | 13.7 |
圆锥滚子轴承 | Tapered roller bearings | 352222X2/YA1 | 97822K | 110×200×92 | 11.5 |
圆锥滚子轴承 | Tapered roller bearings | 352222X2 | 97822EK | 110×200×124 | 16.5 |
圆锥滚子轴承 | Tapered roller bearings | 352222X2 | 97822K | 110×200×74 | 11.5 |
圆锥滚子轴承 | Tapered roller bearings | 352226X2 | 97526E | 130×230×149 | 27.6 |
圆锥滚子轴承 | Tapered roller bearings | 352226X2 | 97526EK | 130×230×149 | 27.4 |
圆锥滚子轴承 | Tapered roller bearings | 352226X2 | 97526EY | 130×230×149 | 25.6 |
圆锥滚子轴承 | Tapered roller bearings | 352226X2 | 97526E | 130×230×150 | 24.7 |
圆锥滚子轴承 | Tapered roller bearings | 352228X2 | 97528EK | 140×250×157 | 31.7 |
圆锥滚子轴承 | Tapered roller bearings | 352230X2/YA | 97530EK | 150×270×169 | 39.4 |
圆锥滚子轴承 | Tapered roller bearings | 352230X2 | 97530 | 150×270×172 | 40 |
圆锥滚子轴承 | Tapered roller bearings | 352232X2 | 97532 | 160×290×180 | 46.2 |
圆锥滚子轴承 | Tapered roller bearings | 352236X2 | 97536 | 180×320×190 | 52.3 |
圆锥滚子轴承 | Tapered roller bearings | 352236X2 | 97536E | 180×320×190 | 62.7 |
圆锥滚子轴承 | Tapered roller bearings | 350602 | 97702 | 15×38×46 | - |
圆锥滚子轴承 | Tapered roller bearings | 352013 | 97713FKT | 65×100×60 | - |
圆锥滚子轴承 | Tapered roller bearings | 350614 | 797914 | 68×115×79.7 | 2.85 |
圆锥滚子轴承 | Tapered roller bearings | 350615 | 797915 | 74×132×71 | 3.28 |
圆锥滚子轴承 | Tapered roller bearings | 3506/99.5 | 97720K | 99.5×182×160 | 12.9 |
圆锥滚子轴承 | Tapered roller bearings | 3506/99.5/S0 | 97720KT | 99.5×182×160 | 12.9 |
圆锥滚子轴承 | Tapered roller bearings | 350620 | 97720 | 100×182×112 | 13.2 |
圆锥滚子轴承 | Tapered roller bearings | 350620 | 97720K | 100×182×112 | - |
圆锥滚子轴承 | Tapered roller bearings | 350626/C9 | 97826U | 130×214×115.6 | 15.7 |
圆锥滚子轴承 | Tapered roller bearings | 3506/129.5 | 97726K | 129.5×230×208 | 27.8 |
圆锥滚子轴承 | Tapered roller bearings | 350633/C9 | 97833U | 165×290×150 | 41.1 |
圆锥滚子轴承 | Tapered roller bearings | 350636 | 97736 | 180×340×180 | 71.9 |
圆锥滚子轴承 | Tapered roller bearings | 350636/C3 | 3G97736 | 180×340×180 | 71.9 |
圆锥滚子轴承 | Tapered roller bearings | 350652 | 97752 | 260×430×180 | 93.4 |
圆锥滚子轴承 | Tapered roller bearings | 350660 | 97760 | 300×420×175 | 65.6 |
圆锥滚子轴承 | Tapered roller bearings | 3706/305.079/YA | 187761 | 305.079×500×200 | 141 |
圆锥滚子轴承 | Tapered roller bearings | 3709/305.079 | 187761K | 305.079×500×200 | 142 |
圆锥滚子轴承 | Tapered roller bearings | 350666 | 97966 | 330×420×100 | 28.9 |
圆锥滚子轴承 | Tapered roller bearings | 350670 | 97770 | 350×590×200 | 212 |
圆锥滚子轴承 | Tapered roller bearings | 350672 | 97772 | 360×530×155 | 107 |
圆锥滚子轴承 | Tapered roller bearings | 3509/382/HA | 97776 | 381×590.55×244.475 | 245 |
圆锥滚子轴承 | Tapered roller bearings | 350688 | 97788 | 440×650×196 | 208 |
圆锥滚子轴承 | Tapered roller bearings | 350698 | 97798 | 490×640×180 | 140 |
圆锥滚子轴承 | Tapered roller bearings | 3506/520 | 977/520 | 520×740×190 | 231 |
圆锥滚子轴承 | Tapered roller bearings | 3506/710/C3 | 3G977/710 | 710×1030×236 | 651 |
圆锥滚子轴承 | Tapered roller bearings | 3506/720 | 977/720 | 720×915×190 | 277 |
圆锥滚子轴承 | Tapered roller bearings | - | 879/839.8 | 839.8×1333.5×463.55 | 2230 |
圆锥滚子轴承 | Tapered roller bearings | 3506/1600 | 978/1600 | 1600×2060×560 | 4210 |
圆锥滚子轴承 | Tapered roller bearings | 352220X2-2Z | 197720 | 100×182×117 | 13.22 |
圆锥滚子轴承 | Tapered roller bearings | 352220X2-2Z | 197720 | 100×182×117 | 15.9 |
圆锥滚子轴承 | Tapered roller bearings | 352226X2-2Z-2 | 197726K2 | 129×230×222 | 30.5 |
圆锥滚子轴承 | Tapered roller bearings | 352223X2-2Z-1 | 197726K1 | 129.5×230×222 | 30.3 |
圆锥滚子轴承 | Tapered roller bearings | 352226X2-2Z | 197726K2 | 130×230×222 | 29.5 |
圆锥滚子轴承 | Tapered roller bearings | - | 197726Y | 130×230×222 | 31 |
圆锥滚子轴承 | Tapered roller bearings | - | 197726-1 | 130×230×222 | 29.5 |
圆锥滚子轴承 | Tapered roller bearings | - | 197726-2 | 130×230×222 | 29.4 |
圆锥滚子轴承 | Tapered roller bearings | - | 197726K1 | 130×230×222 | 30 |
圆锥滚子轴承 | Tapered roller bearings | - | 197726K2 | 130×230×222 | 30.1 |
圆锥滚子轴承 | Tapered roller bearings | 352226X3-2Z/HG | 197826G | 130×250×160 | 39.3 |
圆锥滚子轴承 | Tapered roller bearings | 352223X3-2Z/HGS0 | 197826GT | 130×250×160 | 39.3 |
圆锥滚子轴承 | Tapered roller bearings | 3522262Z/S0 | 197726T | 130×230×150 | 30.2 |
圆锥滚子轴承 | Tapered roller bearings | 352226X1-2Z | 197826 | 130×250×217 | 39.3 |
圆锥滚子轴承 | Tapered roller bearings | 352230-2Z | 197730 | 150×270×170 | 43.8 |
圆锥滚子轴承 | Tapered roller bearings | 350626-2Z/YB2 | 197726K1 | 129.5×230×222 | 30.5 |
圆锥滚子轴承 | Tapered roller bearings | 3506/144.463-2Z | 197729 | 144.463×220.79×163.373 | 21.6 |
圆锥滚子轴承 | Tapered roller bearings | 3506/119.095 | 197924 | 119.095×195.26×136.5 | 20.9 |
圆锥滚子轴承 | Tapered roller bearings | 3506/165.087 | 197933 | 119.087×301.701×190.5 | 71.7 |
圆锥滚子轴承 | Tapered roller bearings | 352212 | 97512E | 60×110×66 | - |
圆锥滚子轴承 | Tapered roller bearings | 351307 | 297307 | 35×80×51 | - |
圆锥滚子轴承 | Tapered roller bearings | 351308 | 297308 | 40×90C56 | - |
圆锥滚子轴承 | Tapered roller bearings | 351309 | 297309 | 45×100×60 | - |
圆锥滚子轴承 | Tapered roller bearings | 351310 | 297310 | 50×110×64 | - |
圆锥滚子轴承 | Tapered roller bearings | 351311 | 297311 | 55×120×70 | - |
圆锥滚子轴承 | Tapered roller bearings | 351312 | 297312 | 60×130×74 | - |
圆锥滚子轴承 | Tapered roller bearings | 351313 | 297313 | 65×140×79 | - |
圆锥滚子轴承 | Tapered roller bearings | 351314 | 297314 | 70×150×83 | - |